Cybex 625A Arc Trainer Manuel d'utilisateur télécharger pdf (Page 19)

Cybex Arc Trainer 625A/625AT Owner’s Manual

Lift and move unit

1. Remove large bolts and shipping supports. Keep package material on linkage arms at this

time. This will protect the paint from scratching during assembly.

2. Grasp each rear support leg rmly and lift with one person on each side.

3. Lift the lower rear support legs using proper lifting methods so the front transport wheels are

able to roll on floor.

4. Move unit to intended location.

5. Lower rear support legs.

Attach 625A console assembly

1. Place the console into position on the frame. Do not pinch cables while lowering the console.

Upper Display

Cable

Console

Locknuts (4)

Bolts (4)

Lower

Bracket

Rear of Unit

Lower

Bracket

Hole

Frame

Lower Display

Cable

2. Insert (from underneath) the lower bracket and four bolts into the frame and console. Position

lower bracket with lower bracket hole towards the rear of unit.

3. Thread the four locknuts onto the bolts by hand.

4. Tighten the four bolts and locknuts with a 7/32” Allen wrench and a 9/16” open-end wrench.

5. Plug the upper display cable into the lower display cable.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 93 94

Pas de commentaire

Cybex 625A Arc Trainer Manuel d'utilisateur Page 19