CYBEX U.GO Manuel du propriétaire télécharger pdf (Page 51)

100

Cybex Arc Trainer 750A/750AT Owner’s Manual

Maintenance

Page 4-5

Error Codes

When an error has occurred, “ERROR #” will appear on the text display alternating with the message

“OUT OF ORDER.”

NOTE: Log number will show in the Incline Display as L-01 through L-20.

Press CLEAR button and hold to clear all errors in log. The display reads “NO ERRORS” when log is empty.

Press enter to exit out.

NOTE: See contact information in Chapter 5 – Customer Service for all maintenance and service activities.

Incline and low battery errors are as follows:

Error Number Cause Display Reset/Remedy

24: Incline

moving

too slowly

Incline is commanded to move,

yet the change in feedback

is slower than the minimum

allowed.

None, stored error only Inspect and lubricate the •

lead screw.

Re-calibrate the incline.•

Measure the incline •

potentiometer output.

The potentiometer

could be ‘bad’.

Replace the battery. •

25: Incline

movement

feedback

stopped

Incline is commanded to move

yet the feedback indicates the

value is not changing or ceases

to change as expected.

Dashes shown in incline

window.

Display attempts to

re-calibrate incline position

on entry to Dormant Mode.

26: Incline

disabled

Incline feedback problems could

not be remedied by

re-calibrating after an Error 25.

Dashes shown in incline

window. Incline is

disabled.

Contact service technician.

27: Low

Battery

Battery voltage is reported to be

below the limit of 10.7v DC and

the controller has issued the low

battery warning.

Dashes shown in incline

window. Incline is

disabled.

Further use will re-charge

the battery and the error

condition will be cleared

automatically.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 99 100

Commentaires sur ces manuels

Pas de commentaire

CYBEX U.GO Manuel du propriétaire Page 51

Commentaires sur ces manuels

Produits connexes et manuels pour Conditionnement physique, gymnastique et musculation CYBEX U.GO