Cybex 770T Treadmill Manuel d'utilisateur télécharger pdf (Page 13)

Cybex Owner’s Manual

Choosing and Preparing a Site

Before assembling the unit, verify the chosen site meets the following criteria:

• Area is well lit and well ventilated.

• Surface is structurally sound and properly leveled.

• Free area for access to unit and emergency dismount. Minimum clearance is 19.7 inches (0.5

meters) on the sides of the unit and 78.7 inches (2.0 meters) behind the unit.

• Adjacent units may share the free area.

It is the responsibility of the facility owner/

owner of the equipment to ensure that there is

appropriate clearance around each machine to

allow for safe use and passage.

In compliance with the ADA (American

Disabilities Act) there must be clear oor space

of at least 30 by 48 inches and be served by an

accessible route for at least one of each type

of exercise equipment. If the clear space is

enclosed on three sides (e.g., by walls or the

equipment itself), the clear space must be 36 by

48 inches.

All other machines must have a clear oor space

of 23” for all access point on the machine.

The dimensions stated in the assembly

instructions of this manual include the maximum

foot print (in use) dimensions.

• Area is not in the vicinity of high humidity,

such as in the vicinity of a steam room, sauna,

indoor pool or outdoors. This unit is designed

to function normally in an environment with a

relative humidity range of 30% to 75%.

Exposure to extensive water vapor, chlorine and/

or bromine could adversely affect the electronics

as well as other parts of the unit.

• Area maintains an ambient temperature range

of 50° F (10° C) to 104° F (40° C) degrees.

770T

1 1

Free area

1 19.7”, 0.5m

2 78.7”, 2.0m

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 97 98

Pas de commentaire

Cybex 770T Treadmill Manuel d'utilisateur Page 13