CYBEX TROTTER Manuel de service télécharger pdf (Page 95)

Cybex TROTTER Elite Treadmill Owner’s & Service Manual

D. With the ground wire through the access hole to the lower control bracket, put the

ground wire terminal on the stud on the lower board bracket.

E. Using a 3/8” nutdriver, secure the one nut over the ground wire terminal.

F. Using a Phillips head screwdriver, secure the switch plate to the treadmill with the I

(on) toward the top. See Figure 23.

Upper Display Board

Tools Required

• Phillips head screwdriver

• ESD (Electro Static Discharge) grounding strap

1. Disconnect the external power source.

A. Turn the main power switch on the left side to the off (O) position.

B. Unplug the treadmill from the power outlet.

NOTE: The display board is susceptible to damage from a discharge of static electricity.

While handling parts underneath the console cover use an ESD grounding strap. This

eliminates the potential voltage (static) difference between you and the equipment you

are working on. Wear an ESD strap for the rest of this procedure.

2. Remove the console from the handrail.

NOTE: If you have a cable plugged into the RJ-45 port disconnect it.

A. Using a Phillips head screwdriver, remove the five screws that hold the top console

back to the console front.

Figure 23

Black

White

Brown

Blue

Shown From

Front of Switch

with “I” Toward

the Top

Access Hole

Power Cord

Behind Base

Brackets

Service

Page 7-29

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 107 108

Pas de commentaire

CYBEX TROTTER Manuel de service Page 95