CYBEX LT-16602-4 Manuel de service télécharger pdf (Page 23)

your workout and add to the time you already accumulated. If the Quick Start key has not

been pressed during the 20 second pause, workout data will be cleared and the display will

change to Dormant Mode.

Press Stop a second time to interrupt workout data from cycling and to change the display to

Dormant Mode.

The function of the immobilization method: The purpose

of immobilizing the treadmill is to prevent unauthorized use.

This can be accomplished by removing the e-stop key from

the console, unclipping it from the cord and putting it in a

non-accessible place. See Figure 2.

The emergency dismount: Follow the steps listed below if

you experience pain, feel faint or need to stop your treadmill

in an emergency situation:

1. Grip handrails for support.

2. Step onto the top steps.

3. Pull the e-stop key off the console.

The function of the emergency stop: The e-stop key functions

as the emergency stop. In an emergency situation, remove the e-

stop key from the console and the treadmill will come to a stop.

On the console, the e-stop location looks like Figure 3.

Safety Sentry

If you step off your treadmill during a workout, it may detect that you are not there. After the

pre-selected waiting period “run?” will appear on the center window for a few seconds then

Safety Sentry™ will stop the belt. If you press Quick Start within the time selected you can

resume your workout. NOTE: If you are less than 100 lbs. Safety Sentry may not detect you

are there and cause the treadmill to come to a stop. Safety Sentry is disabled above 11%

grade.

Control During Operation

Control keys on the display are usable during operation and may be pressed at any time to

make adjustments in speed, elevation or data readouts.

Cybex Sport Treadmill Owner’s & Service Manual

e-stop

Figure 3

Figure 2

Operation

Page 3-5

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 97 98

Pas de commentaire

CYBEX LT-16602-4 Manuel de service Page 23